1.Product name: 10 gigabit copper port DIN-rail unmanaged industrial switch
2.Product model: X61010
3.Product specification
Technology standard：IEEE802.3、IEEE802.3u、IEEE802.3ab、IEEE 802.3z、IEEE 802.3x
Product ports：
            GE copper port：10* 10/100Base-T/1000Base-TX(1 group 2*4 10/100/1000M, RJ45,1 group 1*1 10/1000/1000M,RJ45) ,self-adaptive RJ45 port,full duplex/half duplex self-adpative working mode,support MDI/MDI-X self-adaptive
            Power supply: DC dual power supply interface(6-pin 5.08mm spacing terminal)
Transmission distance：twisted pair: 10BASE-T :Cat3,4,5 UTP cable(≤250m)
                                     100/1000BASE-T(X): Cat5 or later UTP cable(≤100m)
 
Function selection of dial switch(customized):
Switch can select the following working method online:
① Standard mode,② cross-device QinQ isolation mode, ③ VLAN isolation mode based on downlink port,④ copper port forced 10M mode, ⑤ cross-device QinQ isolation+copper port forced 10M mode, ⑥ VLAN isolation based on downlink port+copper port forced 10M mode.
Note: Customers can also customize other working modes of the switch according to actual needs.
 
 
Switching properties：
                 switch backplane band width: 20G(no block)
                 Transmission method: store and forward(full wire speed)
                 Packet forwarding rate:14.88Mpps
                 Jumbo frames: support 9126Bytes
                 MAC:4K
                 Cache: 1.5Mbit
LED Indicators:
                Power indicatior: PWR(Green light)
                GE copper port: Link/Act(Yellow light "ON"),Link-down(Yellow light"Off")
                Link-up: Yellow light is on and flash,sending and receiving data
                Green light "ON" is 1000M,Green light"OFF" is 10M or 100M
Industry standard:
               EMI: FCC Part 15 Subpart B Class A, EN 61000-6-4 (Industrial)
               EMS: IEC 61000-4-2 (ESD)，Level 4
               IEC 61000-4-3 (RFS)，Level 3
               IEC 61000-4-4 (EFT)，Level 4
               IEC 61000-4-5 (Surge)，Level 4
               IEC 61000-4-6 (CS)，Level 3
               IEC 61000-4-8
               Shock：IEC 60068-2-27
               Free fall: IEC 60068-2-32
               Vibration : IEC 60068-2-6
Power supply:
               Access terminal: 6-pin 5.08mm spacing terminal 
               Input voltage: DC 12~48V
               Standby power consumption:＜1W;System full-load power consumption:＜65W
               Power supply supports dual power supply redundancy
               Power supply supports non-polarity
Working environment:
               Working temperature:-25~85℃
               Storage temperature:-40~85℃
               Working humidity:5%～95%（no condensation）
               Net/gross weight:0.6Kg
               Installation method: DIN-rail or wall-mounted
Product size: 145mm×135mm×47mm