1.Product name: 1 fiber port 8 copper port PoE din-rail unmanaged industrial switch
2.Product model: X6118P
3.Product specification
Technology standard：IEEE802.3、IEEE802.3u、IEEE802.3ab、IEEE 802.3z、IEEE 802.3x、IEEE802.3ad、IEEE802.3af、IEEE802.3at
Product ports：
GE fiber port：1* 1000Base-X SFP fiber
FE copper port: 8*10/100Base-T(1 group 2*4 RJ45)
PoE power supply PIN:1/2(+),3/6(-),single port output power up to 30W
PoE Port priority: the bigger of the number of port,the higher of the priority
Transmission distance：twisted pair: 10BASE-T :Cat3,4,5 UTP cable(≤250m)
100/1000BASE-T(X): Cat5 or later UTP cable(≤100m)
Fiber port transmission distance is determined by the SFP optical module model, such as: multimode fiber: 1310nm, 2km; Single-mode fiber: 1310nm, 20/40/60km; 1550nm, 20/40/60/80/100/120km
Function selection of dial switch(customized):
Switch can select the following working method online:
① Standard mode,② cross-device QinQ isolation mode, ③ VLAN isolation mode based on downlink port,④ copper port forced 10M mode, ⑤ cross-device QinQ isolation+copper port forced 10M mode, ⑥ VLAN isolation based on downlink port+copper port forced 10M mode, ⑦ fiber port is high priority+copper port is low priority mode.
Note: Customers can also customize other working modes of the switch according to actual needs.
Switching properties：
switch backplane band width: 7.6G(no block)
Transmission method: store and forward(full wire speed)
Packet forwarding rate:5.65Mpps
Jumbo frames: support 1632Bytes
MAC:8K
Cache: 1.0Mbit
LED Indicators:
Power indicatior: PWR1,PWR2(Green light)
① GE fiber: 1000M(Green light is on)
② FE copper: Link/Act(Yellow light is on),Link-down(Yellow light is off),Link-up(Yellow light is on and flash),sending and receiving data
③ PoE ports(1~8 port),PD connection power supply normal(Green light is on)
PoE power supply abnormal(Green light is off) If the external PD is connected
Power supply:
Access terminal: 6-pin 5.08mm spacing terminal
Input voltage: DC48(46~57)V
Standby power consumption:＜5W;System full-load power consumption:＜120W
Power supply supports dual power supply redundancy
Power supply supports non-polarityWorking environment:
Working temperature:-40~85℃
Storage temperature:-40~85℃
Working humidity:10%～90%（no condensation）
Aluminum switch box: protection grade: IP40
Net/gross weight:0.7Kg
Installation method: DIN-rail or wall-mounted
Product size: 145mm×135mm×47.5mm
