1.Product name: DIN-rail 1 fiber 4 copper PoE unmanaged industrial switch
2.Product model: X6114P
3.Product specification
Technology standard：IEEE802.3、IEEE802.3u、IEEE802.3ab、IEEE 802.3z、IEEE 802.3x、IEEE802.3af、IEEE802.3at、IEEE802.1q (VLAN Tagging)、IEEE802.1p(QoS)
Function selection of dial switch:
Gigabit switch can select the following working method online:
① standard mode,② cross-device QinQ isolation mode,③ VLAN isolation mode based on downlink port,④ copper forced 10M mode,⑤ cross-device QinQ isolation+copper forced 10M mode, ⑥ downlink based port VLAN isolation+copper forced 10M mode, ⑦ fiber port is high priority+copper port is low priority mode.
Note: Customers can also customize other working modes of the switch according to actual needs.
Product ports：Gigabit fiber port: 1*1000Base-X SFP fiber,or
A module, built-in 1310/1550nm,single mode fiber,20km,LC 1*9 optical module
B module, built-in 1550/1310nm,single mode fiber,20km,LC 1*9 optical module
Gigabit copper port：4* 10/100Base-T/1000Base-TX（1 group 1*4 10/1000/1000M RJ45)
Power supply: DC dual power supply interface(6-pin 5.08mm spacing terminal)
PoE power supply PIN: 1/2(+),3/6(-),port maximum/average power: 30W/15.4W
DIP switch interface: select the different working mode of switch network communication online
Transmission distance：twisted pair: 10BASE-T :Cat3,4,5 UTP cable(≤250m)
100/1000BASE-T(X): Cat5 or later UTP cable(≤100m)
Multimode optical module: 1310nm,20/40/60km
Single mode optical module: 1310nm,20/40/60/80/100/120
Switching properties：
Gigabit switch backplane band width: 12G(no block)
Transmission method: store and forward(full wire speed)
Packet forwarding rate:8.9Mpps
Jumbo frames: support 10KBytes
MAC:8K
Cache: 1.0Mbit
LED Indicators:
Power indicatior: PWR1,PWR2(Green light)
Gigabit fiber:1000M(Green light is on)
Gigabit copper: Link/Act(Yellow light is on) link-down(Yellow light is off)
Link-up(Yellow light is on and flash,sending and receiving data)
PoE port(1-4 ports): PD connected and powered normally when green light is on.If connect into external PD,PoE power supply is abnormal when green light is off.
Power supply:
Access terminal: 6-pin 5.08mm spacing terminal
Input voltage: DC48V(46~57)
Standby power consumption:＜1W;System full-load power consumption:＜65W
Power supply supports dual power supply redundancy
Power supply supports non-polarityWorking environment:
Working temperature:-40~75℃
Storage temperature:-40~85℃
Working humidity:5%～95%（no condensation）
Net/gross weight:0.65Kg
Installation method: DIN-rail or wall-mounted
Product size: 143.7mm×135mm×47.7mm
