1.Product name: 8 fiber 2 copper rack-mounted gigabit unmanaged commercial switch
2.Product model: X3182
3.Product specification
Technology standard：IEEE802.3、IEEE802.3u、IEEE802.3ab、IEEE 802.3z、IEEE 802.3x、IEEE802.3ad、IEEE802.1q (VLAN Tagging)、IEEE802.1p(QoS)
Product ports：
              GE fiber port: 8*1000Base-X SFP(2 group 1x4 SFP optical port)
              GE copper port: 2*10/100Base-T/1000Base-TX (1 group 2*2  10/1000/1000 self-adaptive RJ45 port)
              Power supply interface: DC Power supply interface（DC ∮2.1mm）
              DIP switch interface: Select different working modes of optical switch online
Transmission distance：twisted pair: 10BASE-T:Cat3,4,5 UTP cable(≤250m)
                                      100/1000BASE-T(X): Cat5 or later UTP cable(≤100m)
                                      Multimode fiber: 1310nm,2km
                                      Single mode fiber: 1310nm,20/40/60km;1550nm,20/40/60/80/100/120km
Switching properties：
                 switch backplane band width: 20G(no block)
                 Transmission method: store and forward(full wire speed)
                 Packet forwarding rate: 14.8Mpps
                 Jumbo frames: support 10KBytes
                 MAC: 16K
                 Cache: 2Mbit
LED Indicators:
                Power indicator: PWR(Green light)
                GE fiber: 1000M(Green light is on)
                GE copper: 1000M(Yellow light is on),10M or 100M(Yellow light is off)
                Link-up(Green light is on and flash),sending and receiving data, Link-down(Yellow and Green light is off)
 
Function selection of dial switch(customized):
                The optical switch with a three-digit dial switch, which can be selected online in built-in 8 working modes:
                ①.Standard mode,②.Cross-device QinQ isolation mode,③.Uplink port link aggregation mode, ④ VLAN isolation mode based on downlink port, ⑤forced copper 10M mode,⑥ Cross-device QinQ isolation+port forced 10M mode, ⑦ VLAN isolation based on downlink port+copper port forced 10M mode ⑧ fiber port is in low priority+copper port is in high priority mode
Note: Customers can also customize other working modes of the switch according to actual needs.
External power supply:
                  Power adapter: DC ∮2.1mm,1.2m,input voltage: AC100~240V 50~60Hz,output:DC12V/1A,
Standby power consumption :＜1.4W,full load power consumption: ＜7.5W
Working environment:
               Working temperature:-20~70℃
               Storage temperature:-40~85℃
               Net/gross weight:0.2kg
               Shell: Aluminium
Installation method: Rack-mounted
Product size: 191.6mm×96.86mm×30mm